The door and wall construction for multi-purpose applications, which has been tested in accordance with European standards (EN 1364 / 1634) and German standards (DIN 4102), fulfils all the requirements of fire protection classes EI30 (T30 / F30) and EW30 (G30)
The series is based on highly stable 5-chamber hollow profiles with a basic depth of 80 mm and is also suitable for generous clear openings. In conjunction with optional fittings components, tailor-made multi-purpose doors can be created to meet additional requirements for building security and automation, e.g. burglar resistance up to RC 3, panic function, safety barrier loading, access control and sound reduction. Floor-to-ceiling, large glass formats and fixed glazing for indoor use that is suitable for safety barrier loading are also possible.
For special requirements such as those applicable to exits in nurseries, Schüco offers solutions for fire and smoke protection which ensure that the emergency exit door function is triggered using a door handle with an installation height of 1500 mm. Anti-finger-trap doors can also be installed. In addition, the use of profile-integrated door closers with a free swing function enables easy-access openings, which can also be used by smaller children or older people without any problems.
PRODUCTS BENEFITS
Design
- Clear opening dimensions up to 1400 mm x 2988 mm and floor-to-ceiling glazing up to 1400 mm x 3000 mm for maximum transparency
- Standard and angled glazing beads and centre glazing broaden the range of possible designs
- Concealed fittings such as door hinges, door closers and pre-selector for an elegant appearance
- Vertical silicone joints: combination of fixed glazing with corner constructions for inner and outer corners enable very narrow face widths
Automation
- Side-hung door drives approved
- Emergency exit switches for securing exit areas
- Access control systems in combination with Schüco Door Control System (DCS) possible
- Schüco locks with electric coupling for access control; also with day setting
- Schüco electric locks for single and multi-point locking up to RC 3: variable security depending on requirements
Security
- Anti-finger trap protection: e.g. for side-hung door drives or use in nurseries to secure the secondary closing edges
- RC 2 burglar resistance with latch and bolt locks for single and double-leaf doors
- Fixed glazing with safety barrier loading, tested and approved in accordance with DIN EN 12600 and TRAV
- Uniform, fully tested and certified range of fittings
- Approved for internal and external single and double-leaf doors as well as fixed glazing
PREVIEW SPECIFICATION
The fittings for the T-30 fire-resistant units must be used in accordance with approval certificate no.: Z-6.20-1888, T 30-1 / T 30-2 “Schüco ADS 80 FR 30”.
Barrel hinges, T-30
Three-part aluminium barrel hinges with the dimensions 22 x 170 mm, for leaf loads up to 180 kg.
Design features:
All the mechanics for secure anchoring and for fine adjustment are positioned in the door rebate. Fine adjustments can be made without the door leaf being removed.
Category of use in accordance with DIN EN 1935 Class 4
Corrosion protection in accordance with DIN EN 1670 Class 4
Hinge class in accordance with DIN EN 1935 Class 13
Mechanical loading in accordance with DIN EN 12400 Class 8
BT 422 fitting for single-leaf, aluminium, T 30-1 fire doors in accordance with DIN 4102
Locking function B (in accordance with DIN EN 1125)
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic latch-and-bolt lock with automatic locking, without latch retention, stainless steel meeting stile, nickel-plated latch and bolt, split latch boss, designed for profile cylinder. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Strike plate.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door handle Schüco – Design Art. No.: 240191, stainless steel.
Door closer:
“DORMA TS 93” or “GEZE TS 5000”, slide rail, closer size corresponds to door leaf width.
BT 425 fitting for single-leaf, aluminium, T 30-1 fire doors in accordance with DIN 4102
Locking function E (in accordance with DIN EN 1125)
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic latch-and-bolt lock with automatic locking, with latch retention, stainless steel face plate, nickel-plated latch and bolt, designed for profile cylinder. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Strike plate / with electric strike.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door knob Schüco Art. No.: 210714, stainless steel.
Door closer:
“DORMA TS 93” or “GEZE TS 5000”, slide rail, closer size corresponds to door leaf width.
BT 461 fitting for double-leaf, aluminium, T 30-2 fire doors in accordance with DIN 4102
Locking function B (in accordance with DIN EN 1125), partial panic
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic latch-and-bolt lock, without latch retention, stainless steel face plate, nickel-plated latch and bolt, split latch boss, designed for profile cylinder. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Strike plate.
Operating the secondary leaf:
Concealed rebate lever bolt, switch latch, shoot bolts, shoot bolt guide, floor socket and fixing material.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door handle Schüco – Design Art. No.: 240191, stainless steel.
Door closer on the access and secondary leaf:
“DORMA TS 93 GSR” or “GEZE TS 5000 IS”, with integrated door selector arm, closer size corresponds to door leaf widths.
BT 463 fitting for double-leaf, aluminium, T 30-2 fire doors in accordance with DIN 4102
Locking function E (in accordance with DIN EN 1125), partial panic
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic latch-and-bolt lock, with latch retention, stainless steel face plate, nickel-plated latch and bolt, designed for profile cylinder. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Strike plate / with electric strike, cable link connector.
Operating the secondary leaf:
Concealed rebate lever bolt, switch latch, shoot bolts, shoot bolt guide, floor socket and fixing material.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door pull Schüco Art. No.: 210714, stainless steel.
Door closer on the access and secondary leaf:
“DORMA TS 93 GSR” or “GEZE TS 5000 IS”, with integrated door selector arm, closer size corresponds to door leaf widths.
BT 471 fitting for double-leaf, aluminium, T 30-2 fire doors in accordance with DIN 4102
Locking function B (in accordance with DIN EN 1125), full panic
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic fittings kit, secondary leaf with automatic locking, consisting of: panic latch-and-bolt lock, stainless steel face plate, nickel-plated latch and bolt, split latch boss, designed for profile cylinder, lever bolt lock (shoot bolt lock) with panic function, switch latch with fixing and locking plate, floor socket and fixings, shoot bolts, latch strikers, drive pin. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Operating the secondary leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door handle Schüco – Design Art. No.: 240191, stainless steel.
Door closer on the access and secondary leaf:
“DORMA TS 93 GSR” or “GEZE TS 5000 IS”, with integrated door selector arm, closer size corresponds to door leaf widths.
BT 473 fitting for double-leaf, aluminium, T 30-2 fire doors in accordance with DIN 4102
Locking function E (in accordance with DIN EN 1125), full panic
Door hinges and security pins:
In accordance with the description and anticipated loads.
Lock including accessories:
Panic fittings kit, secondary leaf with automatic locking, consisting of: panic latch-and-bolt lock, with latch retention, stainless steel face plate, latch and bolt, nickel-plated, designed for profile cylinder, lever bolt lock (shoot bolt lock) with panic function, switch latch with fixing and locking plate, floor socket and fixings, shoot bolts, latch strikers, drive pin. Doors with clearance > 2488 mm to 2988 mm must be fitted with a latch-and-bolt lock with top locking.
Operating the secondary leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Operating the access leaf:
Inside: push bar handle kit in accordance with DIN EN 1125, Schüco Art. No.: 240151, stainless steel.
Inside: push bar handle kit, leaf width > 1350 mm, in accordance with DIN EN 1125, Schüco Art. No.: 240217, stainless steel.
Outside: door pull Schüco Art. No.: 210714, stainless steel.
Door closer on the access and secondary leaf:
“DORMA TS 93 GSR” or “GEZE TS 5000 IS”, with integrated door selector arm, closer size corresponds to door leaf widths.
